//! 熔断器模块
//!
//! 实现熔断器模式，用于防止向不健康的供应商发送请求

use serde::{Deserialize, Serialize};
use std::sync::atomic::{AtomicU32, Ordering};
use std::sync::Arc;
use std::time::Instant;
use tokio::sync::RwLock;

/// 熔断器状态
#[derive(Debug, Clone, Copy, PartialEq, Eq, Serialize, Deserialize)]
#[serde(rename_all = "snake_case")]
pub enum CircuitState {
    /// 关闭状态 - 正常工作
    Closed,
    /// 打开状态 - 熔断激活，拒绝请求
    Open,
    /// 半开状态 - 尝试恢复，允许部分请求通过
    HalfOpen,
}

impl std::fmt::Display for CircuitState {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        match self {
            CircuitState::Closed => write!(f, "closed"),
            CircuitState::Open => write!(f, "open"),
            CircuitState::HalfOpen => write!(f, "half_open"),
        }
    }
}

/// 熔断器配置
#[derive(Debug, Clone, Serialize, Deserialize)]
#[serde(rename_all = "camelCase")]
pub struct CircuitBreakerConfig {
    /// 失败阈值 - 连续失败多少次后打开熔断器
    pub failure_threshold: u32,
    /// 成功阈值 - 半开状态下成功多少次后关闭熔断器
    pub success_threshold: u32,
    /// 超时时间 - 熔断器打开后多久尝试半开（秒）
    pub timeout_seconds: u64,
    /// 错误率阈值 - 错误率超过此值时打开熔断器 (0.0-1.0)
    pub error_rate_threshold: f64,
    /// 最小请求数 - 计算错误率前的最小请求数
    pub min_requests: u32,
}

impl Default for CircuitBreakerConfig {
    fn default() -> Self {
        Self {
            failure_threshold: 5,
            success_threshold: 2,
            timeout_seconds: 60,
            error_rate_threshold: 0.5,
            min_requests: 10,
        }
    }
}

/// 熔断器实例
pub struct CircuitBreaker {
    /// 当前状态
    state: Arc<RwLock<CircuitState>>,
    /// 连续失败计数
    consecutive_failures: Arc<AtomicU32>,
    /// 连续成功计数（半开状态）
    consecutive_successes: Arc<AtomicU32>,
    /// 总请求计数
    total_requests: Arc<AtomicU32>,
    /// 失败请求计数
    failed_requests: Arc<AtomicU32>,
    /// 上次打开时间
    last_opened_at: Arc<RwLock<Option<Instant>>>,
    /// 配置
    config: CircuitBreakerConfig,
}

impl CircuitBreaker {
    /// 创建新的熔断器
    pub fn new(config: CircuitBreakerConfig) -> Self {
        Self {
            state: Arc::new(RwLock::new(CircuitState::Closed)),
            consecutive_failures: Arc::new(AtomicU32::new(0)),
            consecutive_successes: Arc::new(AtomicU32::new(0)),
            total_requests: Arc::new(AtomicU32::new(0)),
            failed_requests: Arc::new(AtomicU32::new(0)),
            last_opened_at: Arc::new(RwLock::new(None)),
            config,
        }
    }

    /// 检查是否允许请求通过
    pub async fn allow_request(&self) -> bool {
        let state = *self.state.read().await;

        match state {
            CircuitState::Closed => true,
            CircuitState::Open => {
                // 检查是否应该尝试半开
                if let Some(opened_at) = *self.last_opened_at.read().await {
                    if opened_at.elapsed().as_secs() >= self.config.timeout_seconds {
                        log::info!(
                            "Circuit breaker transitioning from Open to HalfOpen (timeout reached)"
                        );
                        self.transition_to_half_open().await;
                        return true;
                    }
                }
                false
            }
            CircuitState::HalfOpen => true,
        }
    }

    /// 记录成功
    pub async fn record_success(&self) {
        let state = *self.state.read().await;

        // 重置失败计数
        self.consecutive_failures.store(0, Ordering::SeqCst);
        self.total_requests.fetch_add(1, Ordering::SeqCst);

        match state {
            CircuitState::HalfOpen => {
                let successes = self.consecutive_successes.fetch_add(1, Ordering::SeqCst) + 1;
                log::debug!(
                    "Circuit breaker HalfOpen: {} consecutive successes (threshold: {})",
                    successes,
                    self.config.success_threshold
                );

                if successes >= self.config.success_threshold {
                    log::info!("Circuit breaker transitioning from HalfOpen to Closed (success threshold reached)");
                    self.transition_to_closed().await;
                }
            }
            CircuitState::Closed => {
                log::debug!("Circuit breaker Closed: request succeeded");
            }
            _ => {}
        }
    }

    /// 记录失败
    pub async fn record_failure(&self) {
        let state = *self.state.read().await;

        // 更新计数器
        let failures = self.consecutive_failures.fetch_add(1, Ordering::SeqCst) + 1;
        self.total_requests.fetch_add(1, Ordering::SeqCst);
        self.failed_requests.fetch_add(1, Ordering::SeqCst);

        // 重置成功计数
        self.consecutive_successes.store(0, Ordering::SeqCst);

        log::debug!(
            "Circuit breaker {:?}: {} consecutive failures (threshold: {})",
            state,
            failures,
            self.config.failure_threshold
        );

        // 检查是否应该打开熔断器
        match state {
            CircuitState::Closed | CircuitState::HalfOpen => {
                // 检查连续失败次数
                if failures >= self.config.failure_threshold {
                    log::warn!(
                        "Circuit breaker opening due to {} consecutive failures (threshold: {})",
                        failures,
                        self.config.failure_threshold
                    );
                    self.transition_to_open().await;
                } else {
                    // 检查错误率
                    let total = self.total_requests.load(Ordering::SeqCst);
                    let failed = self.failed_requests.load(Ordering::SeqCst);

                    if total >= self.config.min_requests {
                        let error_rate = failed as f64 / total as f64;
                        log::debug!(
                            "Circuit breaker error rate: {:.2}% ({}/{} requests)",
                            error_rate * 100.0,
                            failed,
                            total
                        );

                        if error_rate >= self.config.error_rate_threshold {
                            log::warn!(
                                "Circuit breaker opening due to high error rate: {:.2}% (threshold: {:.2}%)",
                                error_rate * 100.0,
                                self.config.error_rate_threshold * 100.0
                            );
                            self.transition_to_open().await;
                        }
                    }
                }
            }
            _ => {}
        }
    }

    /// 获取当前状态
    #[allow(dead_code)]
    pub async fn get_state(&self) -> CircuitState {
        *self.state.read().await
    }

    /// 获取统计信息
    #[allow(dead_code)]
    pub async fn get_stats(&self) -> CircuitBreakerStats {
        CircuitBreakerStats {
            state: *self.state.read().await,
            consecutive_failures: self.consecutive_failures.load(Ordering::SeqCst),
            consecutive_successes: self.consecutive_successes.load(Ordering::SeqCst),
            total_requests: self.total_requests.load(Ordering::SeqCst),
            failed_requests: self.failed_requests.load(Ordering::SeqCst),
        }
    }

    /// 重置熔断器（手动恢复）
    #[allow(dead_code)]
    pub async fn reset(&self) {
        log::info!("Circuit breaker manually reset to Closed state");
        self.transition_to_closed().await;
    }

    /// 转换到打开状态
    async fn transition_to_open(&self) {
        *self.state.write().await = CircuitState::Open;
        *self.last_opened_at.write().await = Some(Instant::now());
        self.consecutive_failures.store(0, Ordering::SeqCst);
        self.consecutive_successes.store(0, Ordering::SeqCst);
    }

    /// 转换到半开状态
    async fn transition_to_half_open(&self) {
        *self.state.write().await = CircuitState::HalfOpen;
        self.consecutive_successes.store(0, Ordering::SeqCst);
    }

    /// 转换到关闭状态
    async fn transition_to_closed(&self) {
        *self.state.write().await = CircuitState::Closed;
        self.consecutive_failures.store(0, Ordering::SeqCst);
        self.consecutive_successes.store(0, Ordering::SeqCst);
        // 重置计数器
        self.total_requests.store(0, Ordering::SeqCst);
        self.failed_requests.store(0, Ordering::SeqCst);
    }
}

/// 熔断器统计信息
#[derive(Debug, Clone, Serialize, Deserialize)]
#[serde(rename_all = "camelCase")]
pub struct CircuitBreakerStats {
    pub state: CircuitState,
    pub consecutive_failures: u32,
    pub consecutive_successes: u32,
    pub total_requests: u32,
    pub failed_requests: u32,
}

#[cfg(test)]
mod tests {
    use super::*;

    #[tokio::test]
    async fn test_circuit_breaker_closed_to_open() {
        let config = CircuitBreakerConfig {
            failure_threshold: 3,
            ..Default::default()
        };
        let breaker = CircuitBreaker::new(config);

        // 初始状态应该是关闭
        assert_eq!(breaker.get_state().await, CircuitState::Closed);
        assert!(breaker.allow_request().await);

        // 记录 3 次失败
        for _ in 0..3 {
            breaker.record_failure().await;
        }

        // 应该转换到打开状态
        assert_eq!(breaker.get_state().await, CircuitState::Open);
        assert!(!breaker.allow_request().await);
    }

    #[tokio::test]
    async fn test_circuit_breaker_half_open_to_closed() {
        let config = CircuitBreakerConfig {
            failure_threshold: 2,
            success_threshold: 2,
            ..Default::default()
        };
        let breaker = CircuitBreaker::new(config);

        // 打开熔断器
        breaker.record_failure().await;
        breaker.record_failure().await;
        assert_eq!(breaker.get_state().await, CircuitState::Open);

        // 手动转换到半开状态
        breaker.transition_to_half_open().await;
        assert_eq!(breaker.get_state().await, CircuitState::HalfOpen);

        // 记录 2 次成功
        breaker.record_success().await;
        breaker.record_success().await;

        // 应该转换到关闭状态
        assert_eq!(breaker.get_state().await, CircuitState::Closed);
    }

    #[tokio::test]
    async fn test_circuit_breaker_reset() {
        let config = CircuitBreakerConfig {
            failure_threshold: 2,
            ..Default::default()
        };
        let breaker = CircuitBreaker::new(config);

        // 打开熔断器
        breaker.record_failure().await;
        breaker.record_failure().await;
        assert_eq!(breaker.get_state().await, CircuitState::Open);

        // 重置
        breaker.reset().await;
        assert_eq!(breaker.get_state().await, CircuitState::Closed);
        assert!(breaker.allow_request().await);
    }
}